Menene hanyoyin aminci don injunan waldawa ta wurin ajiyar makamashi?

Ana amfani da injin waldi na ajiyar makamashi a cikin masana'antu da yawa saboda haɓakar makamashi da ingantaccen fasali, ƙaramin tasiri akan grid ɗin wutar lantarki, ƙarfin ceton wutar lantarki, ƙarfin fitarwa mai ƙarfi, daidaito mai kyau, walƙiya mai ƙarfi, babu canza launin walda, adanawa akan. nika tafiyar matakai, da kuma high dace.Koyaya, masana'antun da yawa ba su da masaniyar tsarin aikin su na aminci.A ƙasa, zan gabatar da su:

Binciken kafin a yi aiki:

Bincika maƙallan kwance a kowane sassa, tabbatar da murfin kariya yana cikin yanayi mai kyau, da ƙasa da igiyar ƙasa da kyau.In ba haka ba, bai kamata a yi amfani da shi ba.

Dole ne igiyar wutar ta kasance cikakke ba tare da lalacewa ba ko kuma haɗe.

Bincika idan kayan aiki da mita ba su da inganci.Idan lalacewa, gyara ko musanya su da sauri.

Saita wutar lantarki da masu kunna wuta zuwa matsayin “kashe”, canjin walda zuwa “fitarwa,” kuma kunna kullin wutar lantarki zuwa mafi ƙanƙanta (madaidaicin agogo zuwa ƙarshe).

Hanyar aiki:

Kunna maɓallin "ikon";hasken mai nuna alama ya kamata ya haskaka.

Matsar da canjin walda daga "fitarwa" zuwa "welding."Mitar wutar lantarki ya kamata ta nuna.Juya kullin "voltage" a kusa da agogo don ƙara ƙarfin caji.Idan kana buƙatar rage ƙarfin caji, matsar da sauyawa daga “welding” zuwa “fitarwa” kuma kunna kullin “voltage” a gaba da agogo.Lokacin da mai nuni na mitar ƙarfin lantarki ya faɗi zuwa ƙarfin da ake buƙata, matsar da waldawan juyawa zuwa “welding” kuma daidaita kullin “voltage” zuwa ƙarfin da ake so.

Sanya kayan aikin tsakanin na'urorin lantarki biyu kuma taka kan feda don fara walda.

Matakan tsaro:

Kashe wutar lantarki bayan amfani, kuma dole ne a saita maɓallin "welding" zuwa matsayin "fitarwa".

Buɗe akwatin inji kawai don gyarawa bayan tabbatar da cewa an fitar da capacitors da gaske.

Matakan kariya:

Daban-daban kayan da workpieces dole ne su sha gwajin waldi don zaɓar daban-daban cajin ƙarfin lantarki da lantarki matsa lamba domin sanin waldi bayani dalla-dalla ga workpiece kafin al'ada samar iya ci gaba.

Bayan yin amfani da walda na yau da kullun na ɗan lokaci, yakamata a canza wuraren wayoyi na firam ɗin famfo biyu na farko na na'urar watsa walda a kai a kai don hana raguwar ƙarfin fitarwa na taswirar saboda magnetization na DC.

Suzhou Agera Automation Equipment Co., Ltd. ya ƙware a masana'antu da siyar da ingantattun injunan waldawa da ceton makamashi, kayan walda mai sarrafa kansa, da na'urorin walda na musamman na masana'antu.Anjia na mai da hankali kan inganta ingancin walda, inganci, da rage farashin walda.Idan kuna sha'awar ajiyar makamashinmuinji waldi, please contact us：leo@agerawelder.com