Capacitor Ntupu ntụpọ Welding Machine Control Circuit: Kọwaa?

The akara sekit nke a Capacitor Discharge (CD) ntụpọ ịgbado ọkụ igwe bụ ihe dị oké egwu mmewere na-achịkwa kpọmkwem ogbugbu nke ịgbado ọkụ parameters.Edemede a na-abanye n'ime mgbagwoju anya nke sekit njikwa, na-akọwapụta akụkụ ya, ọrụ ya na ọrụ ya dị oke mkpa n'inweta weld ntụpọ na-agbanwe agbanwe na nke dị elu.

Capacitor ichupu ntụpọ Welding Machine Control Circuit: Akọwara

Sekit njikwa nke igwe ịgbado ọkụ ntụpọ CD bụ sistemu eletrọnịkị ọkaibe nke na-ahazi usoro ịgbado ọkụ nke ọma.Ọ nwere ọtụtụ isi ihe na arụ ọrụ nke na-ahụ na weld ntụpọ ziri ezi na nke a na-emegharị.Ka anyị nyochaa isi akụkụ nke sekit njikwa:

1. Microcontroller ma ọ bụ PLC:N'ime obi nke sekit njikwa bụ microcontroller ma ọ bụ onye na-ahụ maka mgbagha mmemme (PLC).Ngwa ndị a nwere ọgụgụ isi na-ahazi akara ntinye, na-arụ algọridim njikwa, ma na-ahazi usoro ịgbado ọkụ, dị ka ịgbado ọkụ ugbu a, voltaji, oge, na usoro.
2. Ngwa ngwa onye ọrụ:Ihe njikwa sekit njikwa na onye ọrụ site na onye ọrụ interface, nke nwere ike ịbụ ihuenyo mmetụ aka, bọtịnụ, ma ọ bụ ngwakọta nke abụọ.Ndị na-arụ ọrụ na-etinye usoro ịgbado ọkụ chọrọ ma nata nzaghachi ozugbo na usoro ịgbado ọkụ.
3. Nchekwa oke ịgbado ọkụ:Sekit njikwa na-echekwa ntọala oke ịgbado ọkụ eburu ụzọ kọwaa.Njirimara a na-enyere ndị na-arụ ọrụ aka ịhọrọ mmemme ịgbado ọkụ nke ahaziri maka ihe dị iche iche, geometry nkwonkwo, na ọkpụrụkpụ, na-eme ka nsonaazụ na-agbanwe agbanwe.
4. Sistemu Nchọpụta na Nzaghachi:Ihe mmetụta n'ime sekit njikwa na-enyocha ihe ndị dị oke mkpa dị ka kọntaktị eletrọd, nhazi ọrụ, na ọnọdụ okpomọkụ.Ihe mmetụta ndị a na-enye nzaghachi na sekit njikwa, na-enye ya ohere ime mgbanwe ozugbo ma nọgide na-enwe ọnọdụ ịgbado ọkụ chọrọ.
5. Usoro mkpali:Usoro mkpalite, na-adịkarị n'ụdị pedal ụkwụ ma ọ bụ bọtịnụ, na-amalite usoro ịgbado ọkụ.Ntinye a na-eme ka sekit njikwa na-ahapụ ike eletrik echekwara na capacitors, na-eme ka ọkpụkpụ ịgbado ọkụ na-achịkwa nke ọma.
6. Atụmatụ nchekwa:Sekit njikwa na-agụnye atụmatụ nchekwa na-echebe ma onye na-arụ ọrụ na igwe.Bọtịnụ nkwụsị ihe mberede, mkpọchi, na usoro nchebe ibufe ibu na-eme ka ọrụ nchekwa dị mma ma gbochie ihe egwu nwere ike ime.
7. Nleba anya na ngosi:N'oge usoro ịgbado ọkụ, sekit njikwa na-enyocha paramita igodo ma gosipụta ozi oge na interface onye ọrụ.Nke a na-enye ohere ka ndị na-arụ ọrụ nyochaa ọganihu nke weld wee mee mgbanwe ọ bụla dị mkpa.

Sekit njikwa bụ ụbụrụ n'azụ ọrụ nke igwe ịgbado ọkụ Capacitor Discharge spot.Ọ na-ejikọta ngwa elektrọnik dị elu, oghere enyi na enyi, yana usoro nchekwa iji nweta welds ntụpọ ziri ezi na agbanwe agbanwe.Ikike ya ịhazi usoro ịgbado ọkụ, nyochaa nzaghachi, na ime mgbanwe n'ọnọdụ mgbanwe na-arụ ọrụ dị oke mkpa n'ịhụ na ịdịmma weld kacha mma na arụmọrụ.Ka teknụzụ na-aga n'ihu na-aga n'ihu, ikike sekit njikwa na-etolite, na-eme ka usoro ịgbado ọkụ dị ọkaibe na akpaaka na ụlọ ọrụ dị iche iche.