Selection of Current Adjustment Switch: Choose the level of the current adjustment switch based on the thickness and material of the workpiece. The power indicator light should be on after powering on.
Electrode Pressure Adjustment: The electrode pressure can be adjusted by the spring pressure nut. Change the compression degree to obtain the desired pressure.
Water and Gas Flow: Ensure that the water and gas flow remain unobstructed and dry. The drainage temperature should be below 40°C, and the drainage volume can be adjusted according to the air temperature. Do not increase the fuse in the ignition circuit.
Maintenance of Electrode Tips: The electrode tip is a consumable. Regularly use an electrode grinder or W5 fine sandpaper to lightly grind the bottom of the electrode tip to keep it clean.
Equipment Protection: For pumps, valves, and on-site welding machines, a shed should be installed to protect them from rain, moisture, and sunlight. Additionally, appropriate fire-fighting equipment should be installed.
Installation of Electrode Tips: The middle of the electrode tip is insulated. Tightening and loosening the electrode tip frequently can affect the contact position of the tip, leading to poor welding results. Therefore, it is strongly recommended to keep the electrode tip installed until it can no longer be used, and avoid frequently removing and reinstalling the electrode tip.
If you are interested in our automation equipment and production lines, please contact us.
(Suzhou Agera Automation Equipment Co., Ltd. specializes in the development of automated assembly, welding, testing equipment, and production lines, primarily applied in the household hardware, automotive manufacturing, sheet metal, and 3C electronics industries. We offer customized welding machines and automation welding equipment and assembly welding production lines according to customer requirements, providing suitable solutions for enterprises to transition and upgrade from traditional to high-end production methods.): leo@agerawelder.com
Post time: Mar-13-2024
