Mechini ea welding ea Capacitor Discharge (CD) e sebelisa mekhoa e fapaneng ea taolo ho laola ts'ebetso ea welding le ho netefatsa boleng bo nepahetseng ba weld. Mekhoa ena ea taolo e bapala karolo ea bohlokoa ho fihlelleng liphetho tse tsitsitseng le tse tšepahalang tsa weld. Sengoliloeng sena se hlahloba mekhoa e fapaneng ea taolo e sebelisoang mochining oa ho cheselletsa letheba la CD le bohlokoa ba ona ho fihlela li-welds tse nepahetseng le tse sebetsang hantle.
- Mokhoa oa Taolo oa nako:Ka mokhoa ona, ts'ebetso ea welding e laoloa ho latela nako e behiloeng esale pele. Phallo ea matla e tsoang ho capacitor e lumelloa ho phalla ka har'a li-workpieces le li-electrode ka nako e itseng. Mokhoa ona o loketse lits'ebetso moo boleng ba weld bo itšetlehileng ka nako ea ts'ebeliso ea matla.
- Mokhoa oa Taolo oa Matla:Taolo e thehiloeng ho matla e tsepamisitse maikutlo ho faneng ka bongata bo itseng ba matla sebakeng sa weld. Mochini o lokisa phallo ea matla ho netefatsa boleng bo ts'oanang ba weld, ho sa tsotelehe phapang ea botenya ba mosebetsi kapa conductivity ea thepa. Mokhoa ona o bohlokoa haholo bakeng sa ho fumana li-welds tse tšoanang ka motsoako o fapaneng oa thepa.
- Mokhoa oa Taolo e thehiloeng ho Voltage:Taolo e thehiloeng ho motlakase e lekanya ho theoha ha motlakase ho pholletsa le motsoako oa weld nakong ea ts'ebetso ea ho ntša. Ka ho boloka boemo bo itseng ba motlakase, mochini o netefatsa phepelo e tsitsitseng ea matla, ka lebaka leo, ho kenella ka mokhoa o ts'oanang oa weld. Mokhoa ona o sebetsa hantle ho hlola mefuta e fapaneng ea thepa le ho fihlela botebo ba weld bo lakatsehang.
- Mokhoa oa Taolo oa Hajoale:Taolo e thehiloeng hona joale e kenyelletsa ho lekola le ho laola motlakase oa tjheseletsa o phallang ka har'a li-workpieces. Ka ho laola boemo ba hona joale, mochine o boloka ho hlahisa mocheso o tsitsitseng le ho theha nugget ea weld. Mokhoa ona o loketse lits'ebetso moo matla a weld le boholo ba nugget e leng lintlha tsa bohlokoa.
- Mokhoa oa Taolo ea Maikutlo a koetsoeng:Taolo ea maikutlo e koetsoeng e kopanya tlhahlobo ea nako ea nnete le tokiso e tsoelang pele. Li-sensor li bokella lintlha ka lintho tse fapaneng tse kang tsa hajoale, voltage, kapa matla, 'me mochini o lokisa maemo ho boloka litšobotsi tse lakatsehang tsa weld. Mokhoa ona o fana ka taolo e nepahetseng le ho ikamahanya le maemo ho fetola maemo a tjheseletsa.
Bohlokoa ba Mekhoa ea Taolo: Khetho ea mokhoa oa ho laola e itšetlehile ka litlhoko tse khethehileng tsa welding le sephetho se lakatsehang. Mokhoa o mong le o mong o na le melemo ea ona ho rarolla mathata a fapaneng:
- Ho lumellana:Mekhoa ea ho laola e netefatsa phano ea matla e tsitsitseng, e thibelang mefokolo e bakoang ke ho se tloaelehe ha thepa kapa li-geometri tse kopaneng.
- Nepahalo:Khetho e nepahetseng ea mokhoa oa ho laola e tiisa taolo e nepahetseng holim'a liparamente tsa weld, ho fihlela botebo bo lakatsehang ba weld, boholo ba nugget le matla.
- Ho ikamahanya le maemo:Mekhoa e meng ea taolo e fana ka ho ikamahanya le maemo ho fapana ha thepa ea thepa, ho netefatsa li-welds tse tšepahalang ho pholletsa le lits'ebetso tse fapaneng.
- Katleho:Ka ho ntlafatsa tšebeliso ea matla, mekhoa ea taolo e kenya letsoho lits'ebetsong tse sebetsang hantle tsa welding, ho fokotsa tšebeliso ea matla le linako tsa potoloho.
Mekhoa ea ho laola e bohlokoa ho fihlelleng liphetho tse lakatsehang tsa welding mochining oa tjheseletsa oa Capacitor Discharge spot. Baetsi le li-operators ba tlameha ho utloisisa litšoaneleho tsa mokhoa o mong le o mong oa taolo le ho khetha o loketseng ka ho fetisisa ho latela thepa, geometry e kopanetsoeng, le litlhoko tsa boleng ba weld. Mokhoa oa ho laola o khethiloeng hantle o kenya letsoho ho ts'ebetsong, li-welds tsa boleng bo phahameng, ho netefatsa ts'ebetso le ts'epahalo ea likarolo tse cheselitsoeng ho pholletsa le liindasteri tse fapaneng.
Nako ea poso: Aug-09-2023
