leqephe_banner

Mekhoa ea ho Fetola Matla a Sehlahisoa ka Medium Frequency Inverter Spot Welding Machine

Matla a hlahisoang ke mochini oa welding oa "frequency inverter spot welding" o bapala karolo ea bohlokoa ho fihlelleng liphetho tse nepahetseng tsa welding. Ho laola matla a tsoang ho lumella hore ho be le liphetoho ho latela litlhoko tse khethehileng tsa welding. Sehloohong sena, re tla tšohla mekhoa e fapaneng ea ho fetola matla a tlhahiso ka mochini oa welding oa maqhubu a mahareng a maqhubu a motlakase.

IF inverter spot welder

  1. Phetoho ea Voltage: Mokhoa o mong oa ho laola matla a tsoang ke ka ho lokisa motlakase oa welding. Motlakase oa welding hangata o laoloa ka ho fapanyetsana karo-karolelano ea li-transformer kapa ka ho fetola motlakase oa motlakase oa motlakase. Ka ho eketsa kapa ho fokotsa motlakase oa welding, matla a tsoang a ka fetoloa ka nepo. Litlhophiso tsa motlakase tse tlase li etsa hore matla a fokotsehe, athe litlhophiso tse phahameng tsa motlakase li eketsa tlhahiso ea matla.
  2. Phetoho ea Hona Joale: Mokhoa o mong oa ho lokisa matla a tsoang ke ka ho laola hona joale oa welding. Hona joale welding e ka fetoloa ka ho fetola motlakase o ka sehloohong oa motlakase kapa ka ho laola tlhahiso ea hona joale ea inverter. Ho eketsa matla a motlakase ho tla lebisa ho matla a phahameng, ha ho fokotseha ha hona joale ho tla fokotsa tlhahiso ea matla.
  3. Phetoho ea Nako ea Pulse: Maemong a mang, matla a tsoang a ka fetoloa ka ho fetola nako ea pulse kapa frequency ea pulse. Ka ho fetola nako ea ho tima / ho tima ea hona joale ea welding, motlakase o tloaelehileng o ka laoloa. Nako e khuts'oane ea ho otla ha pelo kapa maqhubu a phahameng a ho otla a fella ka kakaretso e tlase ea tlhahiso ea matla, athe nako e telele ea ho otla ha pelo kapa maqhubu a tlase a eketsa matla a kakaretso.
  4. Litlhophiso tsa Panel ea Taolo: Mechini e mengata ea li-inter frequency inverter spot welding e na le phanele ea taolo e lumellang hore ho be bonolo ho fetola matla a tlhahiso. Phanele ea taolo e kanna ea ba le likonopo kapa likonopo ho eketsa kapa ho fokotsa tlhahiso ea matla. Litlhophiso tsena hangata li bonts'oa skrineng sa dijithale, tse nolofalletsang phetoho e nepahetseng le e bonolo ea tlhahiso ea matla.
  5. Ntlafatso ea Ts'ebetso ea Welding: Ntle le liphetoho tse tobileng, ho ntlafatsa liparamente tsa ts'ebetso ea welding ho ka ama matla a tlhahiso ka tsela e sa tobang. Lintlha tse joalo ka khatello ea li-electrode, nako ea ho tjheseletsa, le khetho ea lisebelisoa tsa elektrode li ka ama litlhoko tsa matla mme kahoo tsa ama matla a tlhahiso.

Qetello: Ho fetola matla a tlhahiso mochining oa welding oa frequency inverter spot welding o bohlokoa bakeng sa ho fihlela sephetho se lakatsehang. Ka ho laola motlakase oa welding, oa hona joale, nako ea pulse, le ho sebelisa li-setting tsa li-control panel, li-operators li ka lokisa tlhahiso ea matla ho latela litlhoko tse khethehileng tsa welding. Ho utloisisa le ho kenya ts'ebetsong mekhoa ena ea ho lokisa matla a tsoang ho tla kenya letsoho ts'ebetsong e sebetsang hantle le e atlehileng ea welding.


Nako ea poso: May-19-2023