leqephe_banner

Tataiso ea Ts'ebetso le Tokiso bakeng sa Mochini oa Welding oa Nut Spot

Mochini oa welding oa linate ke sesebelisoa se feto-fetohang se sebelisoang haholo liindastering tse fapaneng bakeng sa ho kopanya likarolo tsa tšepe hantle. Ho netefatsa ts'ebetso e atlehileng ea li-welding le ho fihlela li-welds tse tsitsitseng le tse matla, ho bohlokoa ho latela mekhoa e nepahetseng ea ts'ebetso le ho tsamaisa mochini o sebetsang hantle. Sengoliloeng sena se fana ka tataiso e felletseng mabapi le ts'ebetso ea mochini oa ho cheselletsa linate le malebela a bohlokoa bakeng sa ho lokisa lisebelisoa hantle.

Nut spot welder

  1. Ho sebetsa Mochini oa Welding oa Nut Spot:

Mohato oa Pele: Litokisetso

  • Netefatsa hore mochini o sebetsa hantle 'me likarolo tsohle tsa polokeho lia sebetsa.
  • Lekola phepelo ea motlakase 'me u netefatse hore e fihlela litlhoko tsa motlakase oa mochini.
  • Hloekisa hantle li-electrode tsa welding ho etsa bonnete ba hore u kopana hantle le li-workpieces.
  • Beha li-workpieces ka mokhoa o sireletsehileng sebakeng sa welding.

Mohato oa 2: Matlafatsa

  • Fetola mochine 'me u lumelle hore o fihle ho mocheso o lakatsehang oa ho sebetsa.
  • Netefatsa hore li-electrode tsa welding li hlophisitsoe hantle 'me li loketse ho chesoa.

Mohato oa 3: Fetola Liparamente tsa Welding

  • Beha nako e loketseng ea tjheseletsa, hona joale welding, le matla a eleketrode ho ipapisitsoe le thepa le botenya ba li-workpieces. Sheba lichate tsa li-welding parameter bakeng sa tataiso.

Mohato oa 4: Ts'ebetso ea Welding

  • Theola li-electrode holim'a li-workpieces 'me u qale potoloho ea welding.
  • Boloka khatello e tsitsitseng nakong ea welding ho finyella li-welds tse tsitsitseng le tse tšoanang.
  • Shebella ts'ebetso ea welding ka hloko ho netefatsa hore boleng ba weld bo a fihlelleha.

Mohato oa 5: Tlhahlobo ea Post-Welding

  • Ka mor'a hore tjheseletso e 'ngoe le e 'ngoe e chesehe, hlahloba lenonyeletso la weld bakeng sa mefokolo, joalo ka fusion e sa fellang kapa porosity.
  • Etsa liphetoho tse hlokahalang ho li-parameter tsa welding haeba ho na le mathata a khetholloang.
  1. Tokiso ea Mochini le Khalase:

Mohato oa 1: Tlhahlobo ea Boleng ba Weld

  • Etsa li-welld tsa sampole linthong tse tšoanang le botenya ho lekola boleng ba weld.
  • Lekola ponahalo ea lifaha tsa weld le bots'epehi ho bona hore na ho hlokahala liphetoho.

Mohato oa 2: Li-parameter tsa ho lokisa hantle

  • Butle-butle fetola nako ea ho tjheseletsa, hona joale oa welding, le matla a electrode ho ntlafatsa boleng ba weld.
  • Boloka tlaleho ea liphetoho tse entsoeng bakeng sa litšupiso nakong ea ts'ebetso ea welding nakong e tlang.

Mohato oa 3: Tlhahlobo ea Calibration

  • Kamehla lekanya mochini ho netefatsa ts'ebetso e nepahetseng le e tsitsitseng.
  • Latela litataiso tsa moetsi bakeng sa mekhoa ea ho lekanya.

Ho sebetsa le ho lokisa mochini oa tjheseletsa oa linate ho hloka mokhoa o hlophisitsoeng le ho ela hloko lintlha. Ka ho latela mekhoa e nepahetseng ea ts'ebetso le ho lokisa mochini ka botlalo, basebelisi ba ka fumana li-welds tsa boleng bo holimo ka matla le bots'epehi. Tlhokomelo ea kamehla le ho lekanya mochini ho bohlokoa ho netefatsa hore o sebetsa hantle ha nako e ntse e ea. Ka litataiso tsena, basebelisi ba ka sebelisa mochini oa ho tjheseletsa oa linate ka kholiseho ho fihlela litlhoko tsa lits'ebetso tse fapaneng ka nepo le ka nepo.


Nako ea poso: Aug-03-2023