leqephe_banner

Mokhoa le Mekhoa ea ho Welding Nuts Ho Sebelisa Medium Frequency Spot Welding Machine

Li-welding linate ke ts'ebeliso e tloaelehileng liindastering tse fapaneng, 'me tšebeliso ea mochini oa welding oa maqhubu o mahareng o ka fana ka liphetho tse sebetsang hantle le tse tšepahalang. Sengoliloeng sena se hlahloba ts'ebetso le mekhoa ea ho cheselletsa linate ho sebelisa mochini oa tjheseletsa oa maqhubu a mahareng, ho totobatsa mehato ea bohlokoa le mehopolo ea ho fihlela li-welds tse matla le tse tšoarellang.

IF inverter spot welder

Mokhoa le mekhoa:

  1. Tokiso ea lintho tse bonahalang:Pele o qala ts'ebetso ea welding, etsa bonnete ba hore lisebelisoa li hloekile ebile ha li na litšila tse kang oli kapa litšila. Tokisetso e nepahetseng ea thepa e tiisa boleng bo botle ba weld mme e qoba liphoso.
  2. Khetho ea Electrode le ho Seta:Khetha li-electrode tse loketseng ho latela thepa le boholo ba linate. Li-electrode tse tsamaellanang hantle li netefatsa ho kopana ho tsitsitseng le ho thusa ho aba hona joale ka ho lekana nakong ea welding.
  3. Moralo oa Fixture le Topallo:Etsa moralo o ts'oarellang sesebedisoa le linate sebakeng sa welding. Ho tsamaisana hantle ho etsa bonnete ba hore nate e behiloe ka nepo, e hlahisang li-welds tse nepahetseng.
  4. Tlhophiso ea Liparamente tsa Welding:Beha liparamente tsa tjheseletsa joalo ka hona joale, nako le khatello ea elektrode ho latela mofuta oa thepa, botenya le boholo ba linate. Mekhahlelo ena e khetholla boleng ba weld mme e lokela ho fetoloa bakeng sa liphetho tse nepahetseng.
  5. Mokhoa oa ho Welding:Beha linate sebakeng se lakatsehang holim'a workpiece 'me u qale mokhoa oa ho cheselletsa. Mochini oa tjheseletsa oa letheba o mahareng o sebelisa khatello le hona joale ho theha motsoako o matla oa weld lipakeng tsa nut le workpiece.
  6. Taolo ea Boleng le Tlhahlobo:Ka mor'a ho cheselletsa, hlahloba lenonyeletso la weld bakeng sa liphoso leha e le life tse kang ho kopanngoa ho sa fellang kapa ho kena hampe. Etsa licheke tsa pono, 'me, ha ho hlokahala, etsa liteko tse sa senyeheng ho netefatsa botšepehi ba weld.
  7. Kalafo ea ho Pholisa le Kamor'a Weld:Lumella kopano e cheselitsoeng ho pholile butle-butle ho qoba khatello e feteletseng ea motsoako oa weld. Ho itšetlehile ka kopo, phekolo e eketsehileng ea post-weld, e kang ho sila kapa ho qeta holimo, e ka 'na ea hlokahala.
  8. Litokomane le ho Boloka Rekoto:Boloka litokomane tse nepahetseng tsa liparamente tsa welding, liphetho tsa tlhahlobo, le tlhahisoleseling efe kapa efe e nepahetseng. Litokomane tsena li ka sebetsa e le sesupo sa li-welds tsa nako e tlang le netefatso ea boleng.

Melemo ea Medium Frequency Spot Welding for Welding Nuts:

  • Li-welds tse nepahetseng le tse phetoang ka mokhoa o fokolang.
  • Ho sebetsa hantle haholo ka lebaka la lipotoloho tse potlakileng tsa ho futhumatsa le ho pholisa.
  • E loketse mefuta e fapaneng ea boholo ba linate le lisebelisoa.
  • Ponahalo e ntle ea weld le botšepehi.
  • Sebaka se fokotsehileng se anngoeng ke mocheso ha se bapisoa le mekhoa e tloaelehileng ea welding.

tjheseletsa linate sebelisa seaplane maqhubu letheba tjheseletsa mochini fana ka e ka tšeptjoang le e sebetsang hantle mokhoa oa ho theha matla le a tšoarellang tjheseletsa manonyeletso. Ka ho latela mokhoa o hlalositsoeng le mekhoa, bahlahisi ba ka netefatsa boleng bo tsitsitseng le ho ntlafatsa mekhoa ea bona ea tlhahiso. Mokhoa ona ha o ntlafatse feela bots'epehi ba sebopeho sa likopano tse cheselitsoeng empa hape o kenya letsoho ntlafatsong ea ts'ebetso ea sehlahisoa le ho ts'epahala liindasteri tse fapaneng.


Nako ea poso: Aug-21-2023