Intshayelelo:
Intloko ye-electrode yinxalenye ebalulekileyo ye-medium frequency inverter spot welder.Nangona kunjalo, ngamanye amaxesha, inokuhlangabezana neengxaki ezinje ngokuvuza kwamanzi, ezinokuchaphazela umgangatho we-welding kwaye zibangele nemiba yokhuseleko.Kweli nqaku, siza kuxubusha into enokuyenza ukuba intloko ye-electrode ye-medium frequency inverter spot welder ivuza amanzi.
Umzimba:
Intloko ye-electrode yenziwe ngamacandelo amaninzi, kubandakanywa i-electrode cap, i-electrode holder, i-electrode stem, kunye nomjelo wamanzi wokupholisa.Xa intloko ye-electrode ivuza amanzi, idla ngokubangelwa ngumonakalo okanye ukubola komjelo wamanzi okupholisa okanye i-cap ye-electrode.
Ukusombulula le ngxaki, kufuneka sithathe la manyathelo alandelayo:
1.Vala umatshini we-welding kwaye unqumle umbane ukuze ugweme ukutshitshiswa kombane.
2.Dibanisa umbhobho wamanzi okupholisa wentloko ye-electrode kwaye ukhangele ukuba kukho amanzi kumbhobho.Ukuba kukho amanzi, kuthetha ukuba umjelo wamanzi wokupholisa wentloko ye-electrode wonakaliswe okanye ugqwalile kwaye kufuneka ulungiswe okanye utshintshwe.
3.Ukuba akukho manzi kumbhobho wamanzi okupholisa, khangela i-cap ye-electrode umonakalo okanye ukukhululeka.Ukuba i-cap ye-electrode yonakalisiwe okanye ikhululekile, kufuneka itshintshwe okanye iqiniswe.
4.Emva kokulungisa okanye ukutshintsha iindawo ezonakalisiweyo, phinda udibanise umbhobho wamanzi okupholisa kwaye uvule umatshini we-welding ukujonga ukuba ingxaki yokuvuza kwamanzi ixazululwe.
Isiphelo:
Intloko ye-electrode licandelo eliphambili le-medium frequency inverter spot welder, kwaye kubalulekile ukuyigcina ikwimeko entle yokuwelda ngokufanelekileyo.Ukuba intloko ye-electrode ivuza amanzi, kufuneka sihlolisise umjelo wamanzi okupholisa kunye ne-cap ye-electrode umonakalo okanye i-corrosion kwaye sithathe amanyathelo afanelekileyo ukuyilungisa okanye ukuyibuyisela.Ngokwenza njalo, sinokuqinisekisa ukhuseleko kunye nomgangatho wenkqubo ye-welding.
Ixesha lokuposa: May-13-2023